2x2 Beginner Tutorial
Solve the 2x2 in 3 steps, layer by layer. The first layer is intuitive — no algorithms. Then just 7 short algorithms to orient the top, and 2 to finish. With practice, under a minute.
Method and structure follow J Perm's beginner 2x2 tutorial: jperm.net/2x2.
Before you start: notation and the 4-move
Hold the cube with the white face at the bottom and yellow on top. A letter turns that face clockwise (as you look at it): R right, U top, F front, L left, D bottom, B back. A ' means counterclockwise, a 2 means 180°. Learn the 4-move first: R U R' U'. Do it 6 times and the cube is back to solved. All of step 1 is built on it.
Step 1. First layer
Goal: the white face complete at the bottom AND the side colours matching all the way around — a finished first layer, not just a white face.
Start with any white corner: turn the cube in your hand until that corner is at the bottom with its white sticker facing down. That is your first piece — keep it at the bottom. For every other white corner: find it in the top layer. It belongs next to the solved piece if they share a side colour, or across from it if they don't. Turn only the top layer (U) until the corner is directly above where it belongs, hold that spot at the front-right, then repeat the 4-move R U R' U' until the corner drops in solved. If a white corner is stuck in the bottom layer in the wrong place, hold it at the front-right and do the 4-move once to pop it into the top layer, then solve it the same way.
Step 2. Yellow on top (OLL)
Goal: all 4 top corners yellow facing up. The first layer stays exactly as it is.
There are only 7 possible patterns. Count how many yellow stickers face up on top: 1, 2 or 0. Find your pattern below, turn the top layer (U) until it matches the description, then do its algorithm once.
Sune
1 yellow up. Hold that corner at the front-left — and the front-right corner's yellow faces the front.
Antisune
1 yellow up. Hold that corner at the front-left — and the front-right corner's yellow faces the right.
Headlights
2 yellows up, next to each other. The other two yellows sit side by side on one face, like a pair of headlights. Hold the headlights on your left.
T
2 yellows up, next to each other — hold them on your right. The other two yellows face away from each other: one to the front, one to the back.
Bowtie
2 yellows up, diagonal from each other. Hold one up corner at the front-right, with the front-left corner's yellow facing the front.
Pi
0 yellows up. One face has two yellows side by side — hold that pair on your left. The other two yellows face the front and the back.
Double Sune
0 yellows up. The front face shows two yellows (headlights) — and the back face shows two as well. Hold the headlights facing you.
Step 3. Corners into place (PLL)
Goal: every corner in its correct position — solved!
Look at the side colours of the top layer and hunt for a bar: two neighbouring corners whose stickers on their shared face are the same colour — a matching pair. If turning the top layer (U) already finishes the cube, you are done. If there is a bar, hold it on your left and do the T perm below, then turn U to line everything up. If there is no bar anywhere, do the Y perm below (any side facing you), then turn U to line up. One algorithm is always enough.
Bar — adjacent swap (T perm)
Hold the bar on your left, then:
No bar — diagonal swap (Y perm)
No matching pair anywhere — do this from any side:
二阶魔方新手教程
3 步层先法还原二阶魔方。第一层靠直觉,不用背公式;然后是 7 个顶层翻色公式和 2 个收尾公式。练熟了 1 分钟以内。
方法和结构参考 J Perm 的二阶新手教程:jperm.net/2x2。
开始之前:符号和 4 步公式
拿法:白色面朝下,黄色朝上。字母表示顺时针转那个面(看着那个面时):R 右,U 顶,F 前,L 左,D 底,B 后。带 ' 是逆时针,带 2 是转 180°。先学会 4 步公式:R U R' U'。做 6 遍就回到还原状态。第 1 步全靠它。
第 1 步:第一层
目标:底面白色拼全,而且四周的侧面颜色也都对齐——是完整的第一层,不只是一个白面。
先随便找一个白色角块:在手里转魔方,把它放到最下面、白色朝下。这是你的第一个块——让它一直留在下面。其余每个白色角块这样做:在顶层找到它。如果它和已拼好的角块有相同的侧面颜色,它就该拼在旁边;没有相同颜色,就拼在对面。只转顶层(U),把角块转到它该去的位置正上方,把那个位置放在右前方,然后重复做 4 步公式 R U R' U',直到角块落进去拼好。如果白色角块卡在底层位置不对的地方,把它放在右前方做一次 4 步公式,把它弹到顶层,再按上面拼。
第 2 步:顶层黄色朝上(OLL)
目标:4 个顶层角块黄色都朝上。第一层保持不动。
顶层只有 7 种图案。先数顶面有几张黄色贴纸朝上:1、2 或 0。在下面找到你的图案,只转顶层(U)把图案转成说明里的样子,再做一次对应公式。
小鱼 (Sune)
1 个黄色朝上。把这个角块放在左前方,并且右前方角块的黄色朝前。
反小鱼 (Antisune)
1 个黄色朝上。把这个角块放在左前方,并且右前方角块的黄色朝右。
车灯 (Headlights)
2 个黄色朝上,相邻。另外两个黄色并排在同一个面上,像一对车灯。把车灯放在你的左边。
T 形 (T)
2 个黄色朝上,相邻——把它们放在你的右边。另外两个黄色背对背:一个朝前,一个朝后。
领结 (Bowtie)
2 个黄色朝上,互相对角。把一个朝上的角块放在右前方,并且左前方角块的黄色朝前。
Pi (π)
0 个黄色朝上。有一个面上有两个黄色并排——把这一对放在你的左边。另外两个黄色一个朝前、一个朝后。
双小鱼 (Double Sune)
0 个黄色朝上。前面有两个黄色(车灯)——后面也有两个。让车灯朝向你。
第 3 步:角块归位(PLL)
目标:每个角块回到正确位置——还原完成!
看顶层的侧面颜色,找一个杠(bar):两个相邻角块在它们共用的那个面上贴纸颜色相同——一对配好的角。如果只转顶层(U)就能对齐,那就完成了。如果有杠,把杠放在你的左边,做下面的 T perm,再转 U 对齐。如果到处都没有杠,做下面的 Y perm(哪面朝你都行),再转 U 对齐。一个公式永远够用。
有杠——相邻交换 (T perm)
把杠放在左边,然后:
没杠——对角交换 (Y perm)
到处都没有配好的一对——哪面朝你都可以,做:
二階魔方新手教程
3 步層先法還原二階魔方。第一層靠直覺,不用背公式;然後是 7 個頂層翻色公式和 2 個收尾公式。練熟了 1 分鐘以內。
方法和結構參考 J Perm 的二階新手教程:jperm.net/2x2。
開始之前:符號和 4 步公式
拿法:白色面朝下,黃色朝上。字母表示順時針轉那個面(看著那個面時):R 右,U 頂,F 前,L 左,D 底,B 後。帶 ' 是逆時針,帶 2 是轉 180°。先學會 4 步公式:R U R' U'。做 6 遍就回到還原狀態。第 1 步全靠它。
第 1 步:第一層
目標:底面白色拼全,而且四周的側面顏色也都對齊——是完整的第一層,不只是一個白面。
先隨便找一個白色角塊:在手裡轉魔方,把它放到最下面、白色朝下。這是你的第一個塊——讓它一直留在下面。其餘每個白色角塊這樣做:在頂層找到它。如果它和已拼好的角塊有相同的側面顏色,它就該拼在旁邊;沒有相同顏色,就拼在對面。只轉頂層(U),把角塊轉到它該去的位置正上方,把那個位置放在右前方,然後重複做 4 步公式 R U R' U',直到角塊落進去拼好。如果白色角塊卡在底層位置不對的地方,把它放在右前方做一次 4 步公式,把它彈到頂層,再按上面拼。
第 2 步:頂層黃色朝上(OLL)
目標:4 個頂層角塊黃色都朝上。第一層保持不動。
頂層只有 7 種圖案。先數頂面有幾張黃色貼紙朝上:1、2 或 0。在下面找到你的圖案,只轉頂層(U)把圖案轉成說明裡的樣子,再做一次對應公式。
小魚 (Sune)
1 個黃色朝上。把這個角塊放在左前方,並且右前方角塊的黃色朝前。
反小魚 (Antisune)
1 個黃色朝上。把這個角塊放在左前方,並且右前方角塊的黃色朝右。
車燈 (Headlights)
2 個黃色朝上,相鄰。另外兩個黃色並排在同一個面上,像一對車燈。把車燈放在你的左邊。
T 形 (T)
2 個黃色朝上,相鄰——把它們放在你的右邊。另外兩個黃色背對背:一個朝前,一個朝後。
領結 (Bowtie)
2 個黃色朝上,互相對角。把一個朝上的角塊放在右前方,並且左前方角塊的黃色朝前。
Pi (π)
0 個黃色朝上。有一個面上有兩個黃色並排——把這一對放在你的左邊。另外兩個黃色一個朝前、一個朝後。
雙小魚 (Double Sune)
0 個黃色朝上。前面有兩個黃色(車燈)——後面也有兩個。讓車燈朝向你。
第 3 步:角塊歸位(PLL)
目標:每個角塊回到正確位置——還原完成!
看頂層的側面顏色,找一個杠(bar):兩個相鄰角塊在它們共用的那個面上貼紙顏色相同——一對配好的角。如果只轉頂層(U)就能對齊,那就完成了。如果有杠,把杠放在你的左邊,做下面的 T perm,再轉 U 對齊。如果到處都沒有杠,做下面的 Y perm(哪面朝你都行),再轉 U 對齊。一個公式永遠夠用。
有杠——相鄰交換 (T perm)
把杠放在左邊,然後:
沒杠——對角交換 (Y perm)
到處都沒有配好的一對——哪面朝你都可以,做:
2x2初心者チュートリアル
2x2を3ステップで層ごとに解きます。第一層は直感で——手順は不要。そのあと上面の向きをそろえる短い手順が7つ、仕上げが2つ。練習すれば1分以内で解けます。
方法と構成は J Perm の 2x2 初心者チュートリアルに基づきます:jperm.net/2x2。
始める前に:記号と4手の動き
持ち方:白の面を下、黄色を上に。文字はその面を時計回りに回すこと(その面を見たとき):R 右、U 上、F 前、L 左、D 下、B 後。' は反時計回り、2 は 180°。まず4手の動きを覚えよう:R U R' U'。6回繰り返すと元に戻ります。第1ステップは全部これで組み立てます。
ステップ1:第一層
目標:下面の白がそろい、側面の色も一周すべて合っていること——白い面だけでなく、第一層が完成した状態です。
まず白いコーナーを1つ:在手の中でキューブを回し、そのコーナーを一番下に、白いステッカーを下向きに置きます。これが1つ目のピース——ずっと下に置いたままにします。残りの白いコーナーはそれぞれ:上の層から見つけます。解けたピースと側面の色が共通なら隣に、共通でなければ向かい側に入ります。上の層(U)だけを回して、コーナーを入るべき場所の真上に持ってきて、その場所を右前に置き、4手の動き R U R' U' をコーナーが入るまで繰り返します。白いコーナーが下の層の間違った場所にはまっていたら、右前に置いて4手の動きを1回やって上の層に跳ね出してから、同じように解きます。
ステップ2:上面を黄色に(OLL)
目標:4つの上面コーナーが黄色を上向きに。第一層はそのまま崩れません。
上面のパターンは7種類だけです。まず、上を向いた黄色ステッカーの数を数えます:1、2、または0。下から自分のパターンを探し、上の層(U)だけを回して説明通りの向きにしてから、その手順を1回やります。
スーン (Sune)
黄色が上向きは1つ。そのコーナーを左前に置き、右前のコーナーの黄色が前を向いている状態。
アンチスーン (Antisune)
黄色が上向きは1つ。そのコーナーを左前に置き、右前のコーナーの黄色が右を向いている状態。
ヘッドライト (Headlights)
黄色が上向きは2つで、隣り合っています。残り2つの黄色は同じ面に並んでいて、ヘッドライトのようです。そのヘッドライトを左側に置きます。
T (T)
黄色が上向きは2つで、隣り合っています——それらを右側に置きます。残り2つの黄色は互いに背を向けています:1つは前、1つは後ろ。
バウタイ (Bowtie)
黄色が上向きは2つで、対角の位置にあります。上のコーナーの1つを右前に置き、左前のコーナーの黄色が前を向いている状態。
パイ (Pi)
黄色が上向きは0。一つの面に黄色が2つ並んでいます——そのペアを左側に置きます。残り2つの黄色は前と後ろを向いています。
ダブルスーン (Double Sune)
黄色が上向きは0。前面に黄色が2つ(ヘッドライト)——背面にも2つあります。ヘッドライトを自分の方に向けて持ちます。
ステップ3:コーナーを正しい位置へ(PLL)
目標:すべてのコーナーが正しい位置へ——完成!
上の層の側面の色を見て、バーを探します:隣り合う2つのコーナーの、共有する面のステッカーが同じ色——そろったペアです。上の層(U)を回すだけでそろうなら、それで完成。バーがあれば、それを左側に持って下の T パームをやり、U を回してそろえます。どこにもバーがなければ、下の Y パームをやり(どの面が前でもOK)、U を回してそろえます。手順は1つで必ず十分です。
バーあり——隣接交換 (T perm)
バーを左側に持って、それから:
バーなし——対角交換 (Y perm)
そろったペアがどこにもない——どの面を前にしてもよいので:
2x2-Anfänger-Tutorial
Den 2x2 in 3 Schritten lösen, Ebene für Ebene. Die erste Ebene ist intuitiv — keine Algorithmen. Dann nur 7 kurze Algorithmen für die Oberseite und 2 zum Schluss. Mit Übung unter einer Minute.
Methode und Aufbau folgen J Perms 2x2-Anfänger-Tutorial: jperm.net/2x2.
Vor dem Start: Notation und der 4-Zug
Haltung: weiße Fläche unten, Gelb oben. Ein Buchstabe dreht die Fläche im Uhrzeigersinn (von vorne gesehen): R rechts, U oben, F vorne, L links, D unten, B hinten. ' ist gegen den Uhrzeigersinn, 2 ist 180°. Lern zuerst den 4-Zug: R U R' U'. Sechsmal wiederholt ist der Würfel wieder gelöst. Schritt 1 baut ganz darauf auf.
Schritt 1. Erste Ebene
Ziel: die weiße Fläche unten ist komplett UND die Seitenfarben passen rundherum — eine fertige erste Ebene, nicht nur eine weiße Fläche.
Beginne mit irgendeiner weißen Ecke: Drehe den Würfel in der Hand, bis diese Ecke unten sitzt und ihr weißer Sticker nach unten zeigt. Das ist dein erstes Teil — es bleibt unten. Für jede weitere weiße Ecke: Suche sie in der oberen Ebene. Teilt sie eine Seitenfarbe mit dem gelösten Teil, gehört sie daneben; wenn nicht, gehört sie gegenüber. Drehe nur die obere Ebene (U), bis die Ecke direkt über ihrem Platz ist, halte diesen Platz vorne rechts und wiederhole den 4-Zug R U R' U', bis die Ecke gelöst einsitzt. Steckt eine weiße Ecke unten an der falschen Stelle, halte sie vorne rechts und mache den 4-Zug einmal, um sie nach oben zu holen, dann löse sie wie oben.
Schritt 2. Gelb nach oben (OLL)
Ziel: alle 4 oberen Ecken gelb nach oben. Die erste Ebene bleibt genau, wie sie ist.
Es gibt nur 7 mögliche Muster. Zähle, wie viele gelbe Sticker oben nach oben zeigen: 1, 2 oder 0. Finde dein Muster unten, drehe die obere Ebene (U), bis es zur Beschreibung passt, und mache dann einmal den Algorithmus.
Sune
1 Gelb oben. Halte diese Ecke vorne links — und das Gelb der Ecke vorne rechts zeigt nach vorne.
Antisune
1 Gelb oben. Halte diese Ecke vorne links — und das Gelb der Ecke vorne rechts zeigt nach rechts.
Headlights
2 Gelb oben, nebeneinander. Die anderen beiden Gelben sitzen nebeneinander auf einer Fläche, wie Scheinwerfer. Halte die Scheinwerfer links.
T
2 Gelb oben, nebeneinander — halte sie rechts. Die anderen beiden Gelben zeigen voneinander weg: eins nach vorne, eins nach hinten.
Bowtie
2 Gelb oben, diagonal gegenüber. Halte eine obere Ecke vorne rechts, und das Gelb der Ecke vorne links zeigt nach vorne.
Pi
0 Gelb oben. Eine Fläche hat zwei Gelbe nebeneinander — halte dieses Paar links. Die anderen beiden Gelben zeigen nach vorne und nach hinten.
Double Sune
0 Gelb oben. Die Vorderseite zeigt zwei Gelbe (Scheinwerfer) — und die Rückseite auch. Halte die Scheinwerfer zu dir.
Schritt 3. Ecken an ihren Platz (PLL)
Ziel: jede Ecke an ihrem richtigen Platz — gelöst!
Schau dir die Seitenfarben der oberen Ebene an und suche einen Balken: zwei benachbarte Ecken, deren Sticker auf der gemeinsamen Fläche gleichfarbig sind — ein passendes Paar. Wenn Drehen der oberen Ebene (U) den Würfel schon fertig macht, bist du fertig. Gibt es einen Balken, halte ihn links und mache den T-Perm unten, dann drehe U, bis alles passt. Gibt es nirgends einen Balken, mache den Y-Perm unten (beliebige Seite zu dir), dann drehe U zum Ausrichten. Ein Algorithmus reicht immer.
Balken — Nachbartausch (T-Perm)
Halte den Balken links, dann:
Kein Balken — Diagonaltausch (Y-Perm)
Nirgends ein passendes Paar — von beliebiger Seite:
Tutoriel débutant 2x2
Résoudre le 2x2 en 3 étapes, couche par couche. Le premier étage est intuitif — aucun algorithme. Ensuite, seulement 7 courts algorithmes pour orienter le haut, et 2 pour finir. Avec de la pratique, moins d'une minute.
La méthode et la structure suivent le tutoriel débutant 2x2 de J Perm : jperm.net/2x2.
Avant de commencer : notation et les 4 mouvements
Tenez le cube face blanche en bas et jaune en haut. Une lettre tourne cette face dans le sens horaire (en la regardant) : R droite, U haut, F avant, L gauche, D bas, B arrière. ' est antihoraire, 2 est 180°. Apprenez d'abord les 4 mouvements : R U R' U'. Répétés 6 fois, le cube revient résolu. Toute l'étape 1 repose dessus.
Étape 1. Premier étage
Objectif : la face blanche complète en bas ET les couleurs latérales assorties tout autour — un premier étage terminé, pas seulement une face blanche.
Commencez par n'importe quel coin blanc : tournez le cube dans votre main jusqu'à ce que ce coin soit en bas, autocollant blanc vers le bas. C'est votre première pièce — gardez-la en bas. Pour chaque autre coin blanc : trouvez-le dans la couche du haut. S'il partage une couleur latérale avec la pièce résolue, il va à côté ; sinon, il va en face. Tournez seulement la couche du haut (U) jusqu'à ce que le coin soit juste au-dessus de sa place, placez cet endroit en avant à droite, puis répétez les 4 mouvements R U R' U' jusqu'à ce que le coin se place résolu. Si un coin blanc est coincé en bas au mauvais endroit, placez-le en avant à droite et faites une fois les 4 mouvements pour le faire remonter, puis résolvez-le de la même façon.
Étape 2. Le jaune en haut (OLL)
Objectif : les 4 coins du haut jaunes vers le haut. Le premier étage reste exactement comme il est.
Il n'y a que 7 motifs possibles. Comptez combien d'autocollants jaunes sont vers le haut : 1, 2 ou 0. Trouvez votre motif ci-dessous, tournez la couche du haut (U) jusqu'à ce qu'il corresponde à la description, puis faites son algorithme une fois.
Sune
1 jaune en haut. Placez ce coin en avant à gauche — et le jaune du coin avant-droit fait face à l'avant.
Antisune
1 jaune en haut. Placez ce coin en avant à gauche — et le jaune du coin avant-droit fait face à droite.
Headlights
2 jaunes en haut, côte à côte. Les deux autres jaunes sont côte à côte sur une même face, comme des phares. Placez les phares à votre gauche.
T
2 jaunes en haut, côte à côte — placez-les à votre droite. Les deux autres jaunes se tournent le dos : l'un vers l'avant, l'autre vers l'arrière.
Bowtie
2 jaunes en haut, en diagonale. Placez un coin du haut en avant à droite, avec le jaune du coin avant-gauche vers l'avant.
Pi
0 jaune en haut. Une face a deux jaunes côte à côte — placez cette paire à votre gauche. Les deux autres jaunes font face à l'avant et à l'arrière.
Double Sune
0 jaune en haut. La face avant montre deux jaunes (des phares) — et la face arrière aussi. Placez les phares face à vous.
Étape 3. Les coins à leur place (PLL)
Objectif : chaque coin à sa place — résolu !
Regardez les couleurs latérales de la couche du haut et cherchez une barre : deux coins voisins dont les autocollants sur leur face commune sont de la même couleur — une paire assortie. Si tourner la couche du haut (U) termine déjà le cube, vous avez fini. S'il y a une barre, placez-la à votre gauche et faites le T perm ci-dessous, puis tournez U pour tout aligner. S'il n'y a de barre nulle part, faites le Y perm ci-dessous (n'importe quel côté face à vous), puis tournez U pour aligner. Un seul algorithme suffit toujours.
Barre — échange adjacent (T perm)
Placez la barre à gauche, puis :
Pas de barre — échange diagonal (Y perm)
Aucune paire assortie nulle part — faites ceci depuis n'importe quel côté :
Tutorial principiante 2x2
Risolvere il 2x2 in 3 passi, strato per strato. Il primo strato è intuitivo — niente algoritmi. Poi solo 7 brevi algoritmi per orientare la parte superiore e 2 per finire. Con la pratica, sotto il minuto.
Metodo e struttura seguono il tutorial principiante 2x2 di J Perm: jperm.net/2x2.
Prima di iniziare: notazione e le 4 mosse
Impugnatura: faccia bianca sotto, giallo sopra. Una lettera gira quella faccia in senso orario (guardandola): R destra, U sopra, F davanti, L sinistra, D sotto, B dietro. ' è antiorario, 2 è 180°. Impara prima le 4 mosse: R U R' U'. Ripetute 6 volte, il cubo torna risolto. Tutto il passo 1 si basa su di esse.
Passo 1. Primo strato
Obiettivo: la faccia bianca completa sotto E i colori laterali abbinati tutto intorno — un primo strato finito, non solo una faccia bianca.
Inizia con un angolo bianco qualsiasi: gira il cubo in mano finché quell'angolo non è in basso con l'adesivo bianco verso il basso. È il tuo primo pezzo — tienilo in basso. Per ogni altro angolo bianco: trovalo nello strato superiore. Se condivide un colore laterale con il pezzo risolto, va accanto; altrimenti va di fronte. Gira solo lo strato superiore (U) finché l'angolo non è proprio sopra il suo posto, tieni quel posto davanti a destra, poi ripeti le 4 mosse R U R' U' finché l'angolo non entra risolto. Se un angolo bianco è bloccato sotto al posto sbagliato, mettilo davanti a destra e fai una volta le 4 mosse per farlo salire, poi risolvilo allo stesso modo.
Passo 2. Giallo sopra (OLL)
Obiettivo: tutti e 4 gli angoli superiori gialli verso l'alto. Il primo strato resta esattamente com'è.
Ci sono solo 7 motivi possibili. Conta quanti adesivi gialli sono rivolti verso l'alto: 1, 2 o 0. Trova il tuo motivo qui sotto, gira lo strato superiore (U) finché non corrisponde alla descrizione, poi fai il suo algoritmo una volta.
Sune
1 giallo sopra. Tieni quell'angolo davanti a sinistra — e il giallo dell'angolo davanti a destra è rivolto in avanti.
Antisune
1 giallo sopra. Tieni quell'angolo davanti a sinistra — e il giallo dell'angolo davanti a destra è rivolto a destra.
Headlights
2 gialli sopra, uno accanto all'altro. Gli altri due gialli sono fianco a fianco su una faccia, come fari. Tieni i fari alla tua sinistra.
T
2 gialli sopra, uno accanto all'altro — tienili alla tua destra. Gli altri due gialli si danno le spalle: uno in avanti, uno indietro.
Bowtie
2 gialli sopra, in diagonale. Tieni un angolo rivolto in alto davanti a destra, con il giallo dell'angolo davanti a sinistra rivolto in avanti.
Pi
0 gialli sopra. Una faccia ha due gialli fianco a fianco — tieni quella coppia alla tua sinistra. Gli altri due gialli sono rivolti in avanti e indietro.
Double Sune
0 gialli sopra. La faccia davanti mostra due gialli (fari) — e anche quella dietro. Tieni i fari rivolti verso di te.
Passo 3. Angoli al loro posto (PLL)
Obiettivo: ogni angolo al suo posto — risolto!
Guarda i colori laterali dello strato superiore e cerca una barra: due angoli vicini i cui adesivi sulla faccia condivisa sono dello stesso colore — una coppia abbinata. Se girare lo strato superiore (U) completa già il cubo, hai finito. Se c'è una barra, tienila alla tua sinistra e fai la T perm qui sotto, poi gira U per allineare tutto. Se non c'è nessuna barra, fai la Y perm qui sotto (qualsiasi lato verso di te), poi gira U per allineare. Un algoritmo basta sempre.
Barra — scambio adiacente (T perm)
Tieni la barra a sinistra, poi:
Nessuna barra — scambio diagonale (Y perm)
Nessuna coppia abbinata da nessuna parte — fai questo da qualsiasi lato:
2x2 Beginner Tutorial
Solve the 2x2 in 3 steps, layer by layer. The first layer is intuitive — no algorithms. Then just 7 short algorithms to orient the top, and 2 to finish. With practice, under a minute.
Method and structure follow J Perm's beginner 2x2 tutorial: jperm.net/2x2.
Before you start: notation and the 4-move
Hold the cube with the white face at the bottom and yellow on top. A letter turns that face clockwise (as you look at it): R right, U top, F front, L left, D bottom, B back. A ' means counterclockwise, a 2 means 180°. Learn the 4-move first: R U R' U'. Do it 6 times and the cube is back to solved. All of step 1 is built on it.
Step 1. First layer
Goal: the white face complete at the bottom AND the side colours matching all the way around — a finished first layer, not just a white face.
Start with any white corner: turn the cube in your hand until that corner is at the bottom with its white sticker facing down. That is your first piece — keep it at the bottom. For every other white corner: find it in the top layer. It belongs next to the solved piece if they share a side colour, or across from it if they don't. Turn only the top layer (U) until the corner is directly above where it belongs, hold that spot at the front-right, then repeat the 4-move R U R' U' until the corner drops in solved. If a white corner is stuck in the bottom layer in the wrong place, hold it at the front-right and do the 4-move once to pop it into the top layer, then solve it the same way.
Step 2. Yellow on top (OLL)
Goal: all 4 top corners yellow facing up. The first layer stays exactly as it is.
There are only 7 possible patterns. Count how many yellow stickers face up on top: 1, 2 or 0. Find your pattern below, turn the top layer (U) until it matches the description, then do its algorithm once.
Sune
1 yellow up. Hold that corner at the front-left — and the front-right corner's yellow faces the front.
Antisune
1 yellow up. Hold that corner at the front-left — and the front-right corner's yellow faces the right.
Headlights
2 yellows up, next to each other. The other two yellows sit side by side on one face, like a pair of headlights. Hold the headlights on your left.
T
2 yellows up, next to each other — hold them on your right. The other two yellows face away from each other: one to the front, one to the back.
Bowtie
2 yellows up, diagonal from each other. Hold one up corner at the front-right, with the front-left corner's yellow facing the front.
Pi
0 yellows up. One face has two yellows side by side — hold that pair on your left. The other two yellows face the front and the back.
Double Sune
0 yellows up. The front face shows two yellows (headlights) — and the back face shows two as well. Hold the headlights facing you.
Step 3. Corners into place (PLL)
Goal: every corner in its correct position — solved!
Look at the side colours of the top layer and hunt for a bar: two neighbouring corners whose stickers on their shared face are the same colour — a matching pair. If turning the top layer (U) already finishes the cube, you are done. If there is a bar, hold it on your left and do the T perm below, then turn U to line everything up. If there is no bar anywhere, do the Y perm below (any side facing you), then turn U to line up. One algorithm is always enough.
Bar — adjacent swap (T perm)
Hold the bar on your left, then:
No bar — diagonal swap (Y perm)
No matching pair anywhere — do this from any side: